PHY269型自動錐入度測定儀

本儀器以國家標準GB/T 269為依據，采用當代先進技術，集機械、光學電子及計算機技術于一體，采用德國JUMO原裝溫度傳感器及日EPSON跟蹤系統性能穩定，可自動完成錐（針）入度實驗。 
本儀器可由計算機監控（無線/有線通訊方式，由用戶選配）。 
本儀器結構合理，性能穩定，操作簡單，是理想的分析檢測設備。 

PHY269型自動錐入度測定儀

主要技術指標：　 
1、錐（針）入深度范圍：0～10.0cm；分辨率：0.01mm（1/2錐） 
2、錐（針） ：尖與測試面判斷誤差小于0.05mm 
3、打  印   ：20列點陣漢字打印 (選配) 
4、顯  示   ：128×64漢字液晶顯示 
5、操作方式 ：程序啟動，操作簡便。（國內*擁有此技術） 
6、環境溫度 ：10～35℃ 
7、環境濕度 ：30%～80% RH
8、電  源   ：AC220士10％V 50Hz士2Hz    
9、功  率   ：小于 kw 
主要特點： 
1、自動錐（針）尖與測試面接觸判斷系統，確保判斷*。 
2、配備光電檢測與測量系統，*消除拖動指針造成的誤差。 
3、整機結構：一體化整機結構，安裝簡便，無連接故障。 
4、配備內部時鐘，無需輸入實驗日期有效使用年限95年

PHY269型自動錐入度測定儀

The PHY269 automatic cone penetration tester
This instrument is based on national standards GB / T 269, using modern advanced technology, the set of mechanical, optical, electronic and computer technology in one, Germany JUMO original temperature sensor and day the EPSON tracking system, performance is stable, can be done automatically taper (needle) into degree experiment.
This instrument can be computer monitoring (wireless / wired communications, optional by the user).
This instrument has a reasonable structure, stable performance, simple operation, and is ideal for analysis and detection equipment.
The main technical indicators:
1, the cone (pin) into the depth range: 0 ~~ 10.0cm; resolution: 0.01mm (1/2 cone)
Cone (pin): the tip with the test surface to determine the error is less than 0.05mm
3, Print: 20 dot matrix Chinese character printing (optional)
4 Display: 128 × 64 character liquid crystal display
5, mode of operation: the program starts, easy to operate. (Domestic exclusive ownership of this technology)
Ambient temperature: 10 to at 35 ° C
7 Environmental Humidity: 30% ~ 80% RH
8 Power supply: AC220 disabilities 10% V 50Hz disabilities 2Hz
Power: less than kw
Main features:
1, the automatic cone (needle) tip in contact with the test surface to determine system to ensure accurate judgment.
2, equipped with photoelectric detection and measurement system, the complete elimination of the error caused by the drag pointer.
3, the whole structure: the integration of the whole structure, installation is simple, no connection failure.
4, with the internal clock, without the need to enter the experiment date effective useful life of 95 years